Mon - Sat : 08:00 - 17:00
7171 yonge street Thornhill, Toronto, ON L3T 0C5

Varnishing of flooring in Toronto

Varnishing of flooring in Toronto

Wood is becoming one of the most popular ways to finish the floor. It is used to make parquet. These are special boards that are assembled into a specific design. To make such a room available for a long period of time, it must be properly maintained. In addition, after installation it is necessary to do some work, which will become a reliable means of protection from constant walking, mechanical damage and even the effect of rotting wood. To achieve this goal, one of the options should be applied to the surface: oil, wax or varnishing of flooring in Toronto.

Oil as a source of wood freshness. Varnishing of flooring in Toronto

This type of product is created according to a special sequence that allows it to penetrate deep into the surface. Each floorboard oil coating leaves behind some minor damage, such as scratches or chips. Unlike varnishing of flooring in Toronto, oiling gives the parquet flooring protection against moisture penetration, leaves its surface ecologically clean and also becomes more durable. Due to the modern peculiarity of manufacturing of such components, the laid product becomes much more beautiful. And the main question remains - the right choice of this very mixture, which will allow this solution not only to preserve the characteristics, but also to improve them significantly when covering the wooden floor with oil. In the case when the temperature in the living room is slightly high and is constantly maintained in this state, it is recommended to use a mixture of natural origin. If the wooden floor is installed in the bathroom, it is necessary to additionally protect it from the penetration of water, as well as to give it an additional antibacterial coating. The parquet must be specially prepared before it can be treated with performance enhancing substances. For this purpose, the grinding method is used. To make it look aesthetically pleasing, it is necessary to use either a special roller or a paint brush with a wide "tail" to cover the floors with oil. After hardening, it is not recommended to install furniture with metal legs on the treated surface. Otherwise, there will be clear black spots on the floor, which will impair the external perception of the floor.

Is the flooring material oil, wax or lacquer?

In addition to oil coating, the carpentry industry uses such materials as wax and varnish. Each of them has special properties. To understand which one of them is better, you should not rely only on the advice of sales consultants in construction stores. The chemical composition is recommended to be used only when the structure of the tree itself has a sufficient number of natural components of similar origin. Also, as mentioned above, the best option is not to find if there is a sudden change in temperature in the room. For example, when the ground with the parquet is outside (pergola, etc.), varnishing of flooring in Toronto will only allow for a short period of time to improve the performance. After a few years, its layer will begin to noticeably deplete and will have to resort to the grinding procedure again and reuse the product. With the introduction of analogy, the period of preservation of such finishing significantly increases. In turn, varnishing of flooring in Toronto has its advantages. From the point of view of cost effectiveness and aesthetic appearance, such a floor will be a great advantage of any apartment or house. Over the past few years, the chemical industry has achieved considerable success in creating such products. There is a wide range of products that will improve perception and quality. But, it is necessary to notice, at occurrence of abrasions all perimeter of a room should be processed again, and technology should begin from the moment of polishing. In the work with current products for finishing, used only the best of them. Wood waxing is practically the same as the previous one. Waxing can be used as an additional tool or as an individual finishing. In the latter case, it will be mixed with the above-mentioned blend manufacturer.

Peculiarities of varnishing of flooring in Toronto

The main advantage of it is that the surface is practically not necessary to wash out. It is enough to walk a slightly moistened mop and it will shine again as before. Moreover, it will significantly improve protection against mechanical impact. If the creation of special protection is performed incorrectly, the owner may notice:

  • Craters. They occur at the moment when the specialist's qualification is small, or the solvent is selected incorrectly.
  • Roughness. Sawdust residues or particles of fine trash or dust get underneath the substance.
  • White spots. Excessive saturation of the product used with moisture.
  • Bubbles. They are created when too much finishing substance is used.
  • Strips. If coating work is too slow.